Cancel print button/Funktion geht nicht
Dieses Makro in eurer mainsail.cfg tauschen und in den Settings den "cancel print button" an machen.
Makros
[gcode_macro CANCEL_PRINT]
description: Bricht den aktuellen Druck ab
rename_existing: CANCEL_PRINT_BASE
variable_park: True
gcode:
## Move head and retract only if not already in the pause state and park set to true
{% if printer.pause_resume.is_paused|lower == 'false' and park|lower == 'true'%}
_TOOLHEAD_PARK_PAUSE_CANCEL
{% endif %}
TURN_OFF_HEATERS
CANCEL_PRINT_BASE
######################################################################
# Druckkop Parkbefehl
######################################################################
[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description: Helper: Parkposition im PAUSE and CANCEL_PRINT
variable_extrude: 1.0
gcode:
##### set park positon for x and y #####
# default is your max posion from your printer.cfg
{% set x_park = printer.toolhead.axis_maximum.x|float - 5.0 %}
{% set y_park = printer.toolhead.axis_maximum.y|float - 5.0 %}
{% set z_park_delta = 2.0 %}
##### calculate save lift position #####
{% set max_z = printer.toolhead.axis_maximum.z|float %}
{% set act_z = printer.toolhead.position.z|float %}
{% if act_z < (max_z - z_park_delta) %}
{% set z_safe = z_park_delta %}
{% else %}
{% set z_safe = max_z - act_z %}
{% endif %}
##### end of definitions #####
{% if printer.extruder.can_extrude|lower == 'true' %}
M83
G1 E-{extrude} F2100
{% if printer.gcode_move.absolute_extrude |lower == 'true' %} M82 {% endif %}
{% else %}
{action_respond_info("Extruder not hot enough")}
{% endif %}
{% if "xyz" in printer.toolhead.homed_axes %}
G91
G1 Z5 F900
G90
G1 X{x_park} Y{y_park} F6000
{% if printer.gcode_move.absolute_coordinates|lower == 'false' %} G91 {% endif %}
{% else %}
{action_respond_info("Printer not homed")}
{% endif %}
Zusätzliche Makros
Druckpause
######################################################################
# Druckpause
######################################################################
[gcode_macro PAUSE]
description: Pausiert den aktiellen Druck
rename_existing: PAUSE_BASE
# change this if you need more or less extrusion
variable_extrude: 1.0
gcode:
##### read E from pause macro #####
{% set E = printer["gcode_macro PAUSE"].extrude|float %}
##### set park positon for x and y #####
# default is your max posion from your printer.cfg
{% set x_park = printer.toolhead.axis_maximum.x|float - 5.0 %}
{% set y_park = printer.toolhead.axis_maximum.y|float - 5.0 %}
##### calculate save lift position #####
{% set max_z = printer.toolhead.axis_maximum.z|float %}
{% set act_z = printer.toolhead.position.z|float %}
{% if act_z < (max_z - 2.0) %}
{% set z_safe = 2.0 %}
{% else %}
{% set z_safe = max_z - act_z %}
{% endif %}
{%set min_extrude_temp = printer.configfile.settings["extruder"]["min_extrude_temp"]|int %}
{%set act_extrude_temp = printer.extruder.temperature|int %}
##### end of definitions #####
PAUSE_BASE
G91
{% if act_extrude_temp > min_extrude_temp %}
G1 E-{E} F2100
{% else %}
{action_respond_info("Extruder not hot enough")}
{% endif %}
{% if "xyz" in printer.toolhead.homed_axes %}
G1 Z{z_safe} F900
G90
G1 X{x_park} Y{y_park} F6000
{% else %}
{action_respond_info("Printer not homed")}
{% endif %}
End Print
#####################################
# END PRINT #
#####################################
[gcode_macro END_PRINT]
description: All what needs to be done at print end
gcode:
M117 Turn off Heaters
TURN_OFF_HEATERS ; Turn off bed and nozzle
G91 ; Relative positioning
SET_GCODE_OFFSET Z_ADJUST=+0.06
M117 Retract
G1 E-1 F3000 ; Retract
G1 X-0.5 Y-0.5 Z20 E-5 ; Move a bit and retract filament even more
G90 ; Absolute positioning
G1 X0 Y180 Z35 F2200 ; Move bed to front
M107 ; Turn off part fan
M84 ; Steppers off
G90 ; Absolute positioning
M117 Print done ; Send finish to display
Druckwiederaufnahme
######################################################################
# Druckwiederaufnahme
######################################################################
[gcode_macro RESUME]
description: Setzt den aktuellen Druck fort
rename_existing: RESUME_BASE
gcode:
##### read E from pause macro #####
{% set E = printer["gcode_macro PAUSE"].extrude|float %}
{%set min_extrude_temp = printer.configfile.settings["extruder"]["min_extrude_temp"]|int %}
{%set act_extrude_temp = printer.extruder.temperature|int %}
#### get VELOCITY parameter if specified ####
{% if 'VELOCITY' in params|upper %}
{% set get_params = ('VELOCITY=' + params.VELOCITY) %}
{%else %}
{% set get_params = "" %}
{% endif %}
##### end of definitions #####
{% if act_extrude_temp > min_extrude_temp %}
G91
G1 E{E} F2100
{% else %}
{action_respond_info("Extruder not hot enough")}
{% endif %}
RESUME_BASE {get_params}
No Comments